Universal Multichannel Low Voltage Power Supply System
SY8800
The CAEN Mod. SY8800 is a high density floating low voltage power supply system, designed to power low noise electronics with medium and high currents. Six modules have been developed so far:
-
2÷7V 550W (typ. 110A @5V)
-
2÷7V 1100W (typ. 220A @5V)
-
±7÷16V 550W (typ. 23A @±12V)
-
±7÷16V 1100W (typ. 46A @±12V)
-
±20÷28V 550W (typ. 11A @± 24V)
-
±20÷28V 1100W (typ. 22A @± 24V)
The system is factory-configured. The system is provided with Remote Sensing Lines to compensate for the voltage drop over the connection cables.
|
Ethernet connector TH 10Base-T female connector TTL signals (TCP/IP) for Mod.SY8800 |
USB connector AMP 787780-2, USB Type B for Mod.SY8800 |
Consult our connectors reference page for technical information.
Module control can take place either locally, assisted by a Graphic colour display or remotely, via Ethernet, USB, CANBUS and RS232.
Safety features allows the module to perform as a current generator and includes:
|
Channels |
can be enabled or disabled through the Interlock logic. The LV output Ramp-up and Ramp-down times may be selected independently for each channel in 5ms steps. |
|
Overvoltage and Undervoltage protection |
when the output voltage differs from the programmed value. |
|
Overcurrent detection |
if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off. |
|
Programmable maximum channel output |
voltage limit (VOVP): the channel is tripped off when its output voltage exceeds VOVP. |
|
Safety Board Interlock |
this protection disables the HV generation when the HV outputs are not connected to their loads. |
Features
-
Factory configured modular system
-
5 free slots for power supply modules
-
3U x 19″ x 35 cm crate size
-
Floating channels
-
Local and Remote Control
-
Remote control via Ethernet, USB, CANBUS and RS232
-
Max output power: 2.5kW @ 220Vac, 1.5kW @ 115Vac
-
Up to 8 independent channels
-
Low noise
-
Available Modules:
-
2÷7V 550W (110A @5V) 1 slot
-
2÷7V 1100W (220A @5V) 2 slot
-
±7÷16V 550W (23A @±12V) 1 slot
-
±7÷16V 1100W (46A @±12V) 2 slot
-
±20÷28V 550W (11A @±24V) 1 slot
-
±20÷28V 1100W (22A @±24V) 2 slot
-
10 mV Voltage Set/Monitor resolution
-
100/200 mA Current Set/Monitor resolution (2÷7V)
-
20/40mA Current Set/Monitor resolution (±7÷16V/±20÷28V)
-
Individual channel ON/OFF and TRIP
-
Sense wires for the voltage drop recovery
-
4 Analog Input, 4 Digital Input, 4 Digital Output
-
Fans embedded for vertical cooling
-
SY8800: Manuals
Request a Quote
Footer
