8 Channel 6 kV/ 20 µA Desktop Power Supply Module (USB/Ethernet/Touchscreen)
DT8034H
The CAEN Mod. DT8034H provides 8 independent 6 kV/ 20 µA channels in a desktop package (110/220V AC Powered). Each channel can provide a 6 kV max voltage and a 20 µA max current. The unit is available with positive, negative and “mixed” (4 positive and 4 negative) channels.
Channels outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 100 pA Iset resolution.
|
SHV connector HV coaxial connector, 8 channels for Mod. DT8034H |
Consult our connectors reference page for technical information.
Module control can take place either locally thanks to a 2.8″ Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet.
A complete set of Software Tools is available to control these units; the user can freely download low level libraries, LabVIEW driver and Graphical application software.
Safety features allows the module to perform as a current generator and includes:
|
Channels |
can be enabled or disabled through the Global Interlock logic. |
|
Overvoltage and Undervoltage warning |
when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V). |
|
Overcurrent detection |
if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off. |
|
Hardware VMAX |
Programmable VMAX protection limit. |
|
Safety Board Interlock |
common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function. |
Features
-
8 independent channels in a Desktop case (110/220V AC Powered)
-
6 kV / 20 µA output range
-
Channels with either positive or negative polarity
-
SHV coaxial output connectors
-
Low Ripple
-
Under/over-voltage alert, overcurrent and max. voltage protection
-
Interlock logic for board enable and Individual channel kill
-
100 pA Current monitor resolution (with x10 Imon-Zoom: 10 pA)
-
2.8″ color touch screen display
-
Local and Remote control (USB2.0/Ethernet)
-
Software Tools for easy channel management
DT8034H: Manuals
Request a Quote
Footer
