AG535

The power supplies of the AG535 family house 24 or 12 high voltage channels. The AG535 is available in different versions equipped with SHV or with Radiall Multipin connector:

Radiall 52 pin connector

Single width (5 TE wide), 24 channel, 32 channel (Mod.AG535)

SHV connector

Single width (5 TE wide),12 channels (Mod. AG535D) NEW
Double width (10 TE wide), 24 channels (Mod. AG535S)

Check our connectors reference page for technical information.

The channels share a common ground and the output voltage range is 0 ÷ 3.5 kV, with 500 mV set and monitor resolution. The maximum output current is 3 mA, with 500 nA current set and monitor resolution.

The board is available with either positive or negative output polarity. Mixed version with 6/12 positive and 6/12 negative channels are also available (only with SHV connectors).

The boards are provided with both current and voltage protections. If overcurrent occurs, the relevant channel can be programmed either to turn off after a programmable trip time or to keep on providing the maximum allowed current: this particular feature allows the modules to work as current generator. The maximum output voltage can be set through a potentiometer to a value which is common to all channels and can be read out via software. Channel can be enabled or disabled through the Interlock logic.The HV RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the 1 ÷ 500 V/s range (1 V/s step).
For boards with Radiall 52 pin connector are available the following accessories:

• Mate cable connector (Mod. A996) and relevant insertion/extraction tool (Mod. A995)
• 24 Channel Multipin Radiall to SHV Adapter (Mod. A647 – R647)