16 ch Programmable Spectroscopy Amplifier and 16ch CFD
N1068
The CAEN Mod.N1068 is a 16 channel Programmable Spectroscopy Amplifier with Time Filter, Constant Fraction Discriminator (CFD) and pile-up rejection, implemented in a single width NIM module. This module is designed to be used with Germanium, and many other detectors types connected to charge sensitive preamplifiers. Also adapted for fast input signal like PMT and all fast charge detectors. Available dedicated version for germanium detector (N1068GE). N1068 has the following input configurations:
-
Single Ended (50 Ω Impedance): N1068S and N1068GE
-
Differential (110 Ω impedance): N1068DB
The first stage of the Amplifier circuits is the polarity selector circuit which select the positive or negative input polarity. Follow two different sections which provide the Energy and Timing information. The Energy section is composed by a Spectroscopy amplifier with CR-RC5 shaping type and different time constants: pole-zero compensation, an 8-step coarse gain (2, 4, 8, 16, 32, 64, 128, 256), a 7-bit fine gain (from 1 to 2) and a DC restorer circuit. The time constants have the following values:
-
N1068DB, N1068S: 0.5, 1, 2, 4 μs
-
N1068GE: 0.5, 1, 2, 4, 16 μs
The Timing section is composed by a Timing filter with a differential stage followed by an integration stage both with two-time constants. An amplifier stage provides 4 gain values. This timing signal is sent to a Constant Fraction Discriminator section (Constant Fraction = 30%). The CFD has an auto walk compensation and the delay time is selectable individually for each channel by 5 step jumpers. The width and delay of CFD OUT is individually programmable; the delay can be enabled or disabled. The trigger stage foresees a Programmable Multiplicity Trigger and Multiplicity signal, an analog sum output of every channel CFD out; Multiplicity signal can be daisy chained with those provided by other modules. Chaining with a Sum Output available as well. Pile-up rejection is configurable individually for each channel. When enabled each time a pile-up event occurs, the Energy output is set to the saturation value. The USB 2.0, Ethernet and RS485 interfaces allow to handle all functional parameters.
The N1068 is supported by freely downloadable CAEN-CSA software, available for both Windows and Linux OS.
Features
-
16 channels is a one unit wide NIM module
-
Differential and Single ended versions available
-
Dedicated version for germanium detector
-
Pile-up rejection facility individually selectable
-
Programmable positive or negative input polarity per each channel
-
±4 V input dynamics on 50 Ω (SE) and 110 Ω (Differential)
-
Active baseline restorer with programmable output offset
-
16 channels CFD with 5 step delay individually jumper selectable
-
12-bit programmable delay on ECL CFD output (range: 200 – 800 ns)
-
Timing filter amplifiers with programmable differentiation and integration time
-
CFD, Energy or Timing filter multiplexed output
-
Multiplicity trigger (NIM) with programmable threshold
-
Programmable 4 (5 for N1068GE) shaping time per channel
-
Programmable fast unipolar input mode for PMT and all fast charge detectors
-
8 step coarse gain and 7-bit fine gain for energy amplifier
-
Low Noise
-
Programmable 8-bit pole zero adjustment
-
Completely programmable via USB, Ethernet and RS485: Thresholds. shaping times, gains, Pole-Zero, etc.
-
OR output and Multiplicity output
-
Low Power
N1068: Manuals
N1068: Download
Application Notes
Brochures / Flyers
Driver
Request a Quote
Footer
